Press Control

Electric Presses

Enter your keywords:
Automatic Servo Press

SCHMIDT® Electric Press

 

SCHMIDT® ElectricPress 343A & 345A
with PressControl 600 for Automation

Full programmable motion controlled and fully monitored press for Automated System

An efficient and reliable assembly process is key to the success of your products in an increasingly competitive market. The SCHMIDT® ElectricPress 34x Series with SCHMIDT® PressControl 600 is your most economical solution, combining a cost effective fully programmable assembly press, using innovative electrical drive technology, with closed loop position and force control to provide flexibility and precision to even the most complex assembly tasks. The system also uses integrated sensor technology to provide precise process monitoring, ensuring quality control on every part.

SCHMIDT®'s state-of-the-art assembly technology monitors and controls the entire manufacturing process rather than individual assembly steps. The proprietary SCHMIDT® DataBase software maps the process data of all individual assembly steps into a data bank, including historic data. CAN-bus technology communication compatible with all established field CAN-bus systems is standard on all SCHMIDT® monitored presses. And with the SCHMIDT® PRC OPC software available on these models, data exchange will now become the automation standard.



Features

  • Integrated load cell and process data acquisition board tied into the SCHMIDT® PressControl 600 for force/stroke monitoring
  • Up to (200) customer defined part specific datasets, each containing motion and monitoring profiles, stored in the SCHMIDT® PressControl 600 system allowing for
    o Press to
        • exact position (closed loop control stroke)
        • exact force (closed loop control of force)
        • optional customizable profiles including slope detect and delta stroke
    o Dynamic Bending compensation
    o Fully programmable speeds
  • Virtual handwheel feature in either position or force mode for set-up of parts
  • Standard host PLC interface programs for communication between SCHMIDT® PressControl 600 and a customer supplied host PLC (customer responsible for PLC programming of host PLC).
  • Discrete external I/O interface via the SCHMIDT® PRCGateway
  • EtherNet IP, EtherCAT, PROFIBUS or PROFINET interface via an AnyBus gateway.


Technical Data ElectricPress 343M
Force F max. 4 kN / 900 lbs
Force F 100 % duty cycle 2.5 kN / 560 lbs
Ram Stroke 100 mm / 3.937 inch
Ram Speed max. 150 mm/s or 5.905 in/sec
Resolution PDA

Force
Stroke



1.25N / 0.544 lb.
< 2.42 µm / < 0.0001"
Power Supply

Motor Power
Logic Unit



42 V DC/ 13 A (24 A max.)
24 V DC/ 0.5 A
H x D x W 333x362x207 mm
Weight 25 kg / 77 lbs.
PRC Gateway, number of I/O's 16 Inputs / 16 Outputs
   
Technical Data ElectricPress 345M
Force F max. 10 kN / 2,250 lbs
Force F 100 % duty cycle 6 kN / 1,350 lbs
Ram Stroke 150 mm / 5.905 inch
Ram Speed max. 150 mm/s or 5.905 in/sec
Resolution PDA

Force
Stroke



3.5N / 0.787 lb.
< 2.42 µm / < 0.0001"
Power Supply

Motor Power
Logic Unit



230VAC / 6A (12A max.)
24 V DC/ 0.5 A
H x D x W 530x275x382 mm
Weight 52 kg / 115 lbs.
PRC Gateway, number of I/O's 16 Inputs / 16 Outputs
 




Find out more about SCHMIDT® Electric Press Elements:
Press Control 600
ElectricPress 4xA non-monitored automation version
User Interface
Display & Analysis
Process Data Management
Software Development Tools
Tolerance Analysis Software
Interface & Integration

 


 

 
Specifications
Inches
Metric
Dimensional Drawings
Converter
Pressing
 
Forming
 
Staking
 
Crimping
 
Flaring
 
Compliant Pin