Statistical Process Control
for Press Control 3000
The software package SCHMIDT® SPC is used for determining
the process capability. The program calculates the statistical parameters
from the process and tolerance data. The characteristics of all
quality criteria are calculated online after each assembly process,
and the calculation is available for documentation. Contrary to
conventional systems, the user is constantly informed about the
trend of the assembly and the process quality. User-defined upper
and lower warning and intervention limits inform the process control
when exceeding or falling below these limits about which application-specific
measures can be taken.
In the overview display, you see all necessary information from
the process, such as characteristics (monitors), information pass/fail,
current measuring value, SPC status, average value, Cp and Cpk value,
at a glance..
Each single process can be reconstructed using the production history.
Considering the individual characteristics, additional important
values are displayed graphically and numerically.
Apart from the system-related monitors, other process-relevant information
can be extracted statistically, such as the work integral (area
under the F/s curve) or external measuring data (e.g. temperature).
Find out more about SCHMIDT® Press Controls and Software:
Press Control 50/70
Press Control 500
Press Control 1001
Press Control 3000
Press Control 5000
Press Control HMI
Display & Analysis
Process Data Management
PLC Process Control System
Tolerance Analysis Software
OPC Data Exchange
Interface & Integration